Indoor runners: train indoors due to weather, convenience, personal preference or other reasons.
In fact, there is a plan.
After the watch is bound, go to the COROSAPP device interface to check the device.
The newly added parameters of slope are very useful for slope training runners.
Find the POD2 you just added, click to enter the four options, and then turn on/off the following settings: Enable wearing position: Auto/Foot/Waist, and select Auto.
The most expected distance is the accurate distance measurement function of the foot, similar to the distance measurement function of Stryd.
What data will POD2 measure? From the front hardware, “Little Broken Bean” can be worn on the waist or the foot.
Compared with generation POD1, generation POD2 has a lot of data.
2.
If it is at the waist, it will be affected by the temperature.
It can be seen that unlike the POD1 generation, there is no movement function here.
The package box is quite large, which is similar to the Gaochi watch box.
Real time pace may not pay too much attention to real-time pace in long-distance running, such as LSD.
Direction calibration: Calibrate according to the watch’s dynamic prompts, as well as the power display, POD2 firmware version and deletion..
Calibration is in the main menu – Settings – Accessories – Added Bluetooth Accessories.
Only firmware upgrade and use guide.
It is said that the APEX generation products can also support POD2 through firmware upgrade in the future.
Another meaning is that this “broken” thing breaks through the limitations of GPS watches and can bring you breakthrough feelings in speed, distance accuracy and real-time speed response.
The ID number can be checked on the back of the small broken bean to confirm whether it is consistent.
Is there any solution that does not rely on GPS.
The watch is bound to the POD2POD2 generation.
Temperature wearing on the foot can measure the ambient temperature during training, understand the real test during training, and the weather forecast will have errors at a specific site and time point.
What are the changes between POD2 generation and generation 1? Use step 1 of POD2 as shown in the following table.
It is directly in contact with the outside world and is not affected by body temperature.
Accumulate the new parameters for ascending/descending, which are useful for slope training runners.
The measured data are generally related to the running posture, which has been known by the generation who has used POD.
At present, the five-star dual frequency satellite positioning technology has greatly improved the positioning accuracy of sports watches.
A while ago, the running research room conducted a horizontal evaluation of four mainstream five-star dual frequency sports watches.
In urban high-rise areas, the limited satellite signals (such as building rock wall reflections, bridge holes, etc.) still appear track drift.
POD2’s function Running beans are commonly known as running sensors.
Road runners: They need accurate and real-time speed measurement and distance data, which is beyond the scope of GPS watches.
So the problem is how to measure the distance very accurately.
However, when used in China, Stryd has several major shortcomings, such as high price, enough to buy a watch, full English and many professional words.
Android cannot install apps, and domestic account data of sports watches of various brands cannot be bound with Stryd.
There is a foreign running bean (official name: running power meter) Stryd, which can accurately measure distance, and is called the artifact by some runners.
Some sports watches also have temperature sensors, but the measured temperature is a combination of body temperature and ambient temperature.
The list of items includes a running sensor POD2, a waist clip, two shoe clips, a charger, a TYPE-C charging cable, a storage box and a simple manual.
Many factors limit the use of Stryd.
One advantage is that the POD2 does not need to set the wearing position in advance, and the beans are automatically recognized.
In the case of short distance or interval running or variable speed running, real-time pace is particularly important, and real-time pace does not want to be delayed.
Here are some different parameters.
The weight is below the unofficial data, and you weigh it yourself.
The satellite signal is very poor.
Please add POD2 to the watch before use.
For example, Beijing runners often go to the Yangshan Mountain to run and model new runs.
If the POD2 is worn on the foot, the temperature value is very valuable for reference.
City runners: There have been runners who have been troubled by GPS signal interference in city running before, and they hope to improve the GPS tracking quality.
POD2 sensor: 5.7g POD2+shoe clip: 7.4g POD2+waist clip: 16.4g, 3g lighter than the first generation, powered by lithium battery.
Entry: Main menu – Settings – Accessories – Add Bluetooth accessories The following figure shows the watch interface after a successful connection, which shows the ID number and power value.
Let’s take a look at the breakthroughs of “Little Broken Peas”.
On October 27, when the “Little Broken Bean” came, Gaochi released the second generation of running sensor “Little Broken Bean” POD2, which was urgent for everyone and added the ranging function.
Put the POD2 sensor into the charging chamber, connect the Type-C USB cable, and plug the other end into the USB port.
3.
Is there a way to improve the distance accuracy? The playground where I often run is a special-shaped playground with walls and buildings on both sides.
Users can switch freely according to their own needs.
The first generation adopts button battery sensor, nine axis sensor (acceleration, geomagnetism, gyroscope), temperature sensor, air pressure sensor, and one of them is worn at the waist or foot.
Under what circumstances will the running distance measurement function be used.
Before charging, ensure that the POD2 is powered.
The currently supported watch models include PACE2, APEXPro, Vertix, and Vertix2.
Of course, you can also set it manually in the watch POD setting item.
The data generated by the two wearing parts are also different, as shown in the following figure.
Why is it called “small broken beans”? Broken beans are the homonym of POD.
Different wearing positions and different presentation data will be introduced later.